This information is for the following models:
About this download
Benefits and improvements
- Solves an issue where the Wi-Fi not working when turn on the TV
- Improvement to YouTube language
- Improves general performance of the TV
- Only for use with TV sold in the Philippines. Not all models are sold in all countries.
Check the software version
Your software may already be up to date. If you're not sure, it's easy to check which version of software you have - follow these instructions:
- Turn on your TV and press the [HOME] button on the remote to display the Home Menu.
- Navigate to [Settings], and press [Enter].
- Navigate to [Customer Support] and press [Enter].
- The model and software version should be displayed on the top right-hand corner of the screen: "v6.537" - if the version number is "v6.537" or higher, you already have the most recent firmware.
There are 2 ways to update the firmware on your BRAVIA TV:
- Using the "Automatic Software download" function (recommended)
- Using a USB storage device
Using the "Automatic Software download" function (recommended):Sony provides software updates in order to enhance functionalities and provide users with the latest TV experience. The easiest way to receive software updates is by downloading directly from your TV via the Internet.
NOTE: Make sure that the "Automatic Software download" function is enabled. (By default, this setting is enabled.)
- Press the [HOME] button on the remote.
- Select [Settings], and press [Enter].
- Select [Customer Support] and press [Enter].
- Select [Automatic Software download].
- Select [On] to download the software automatically. Select [Off] to disable it.
IMPORTANT: The following "System Requirements," "File Info," "Download" and "Install," sections relate to the USB storage device update procedure. You can ignore them if you completed the update using the “Automatic Software download” feature.
For other FAQs about Troubleshooting, please see the "Questions and Answers" on the Sony Support Site.
Using a USB storage device:
You can also update the software by using a USB storage device. If you are not connected to the Internet, or the "Automatic Software download" function fails to download, try to download and update using a USB storage device as instructed below.
What You Need
- a computer with access to the Internet
- a USB storage device
- Firmware update to v6.537 for TV
Zip File Name
- 211 382 241 bytes
- Read the instructions carefully or you could end up causing the TV to become unresponsive or require a repair.
- Do not turn the TV off - or disconnect it from the power - while it's updating.
- Do not press any buttons, except the ones mentioned in the instructions.
- Stop any recording before you start with the firmware update. (USB HDD recording models only)
How to download the Updater
Before you install the update, you'll need to download it from the Internet and save it to a USB storage device.
- Download the update file to your PC.
- Click the [Download] button on the top of this page, then read and accept the terms and conditions.
- Click the [Download] button on the bottom of the page to download the update file on your PC.
- Verify the downloaded file name and size.
- Go to the directory where the file was downloaded.
- Verify that the size of the "sony_tvupdate_2017_6537_pff_auth.zip" file is " 211 382 241" bytes.
NOTE: For Windows PC, verify the "Size" instead of "Size on disk" on the Properties screen.
- Extract the downloaded file.
After you extracted the downloaded file, you will find the folder "sony_dtv02B40B09B4B9_00200402".
- Insert the USB storage device into your PC.
- Copy or drag and drop the folder "sony_dtv02B40B09B4B9_00200402" to the root directory of your USB device.
NOTE: "The root directory" is the first or top-most directory of the device, which contains all the other folders.
- Remove the USB storage device from your computer and continue to the next section.
Step 1: Install the update
Once you've downloaded the update file and prepared your USB device, you can install it on your TV. The process can take up to 15-30 minutes and during the installation your TV will turn off before turning itself back on. Please follow the simple steps below:
- Turn on the TV.
- Make sure that no USB devices are inserted into your TV.
- Insert your USB storage device containing the folder "sony_dtv02B40B09B4B9_00200402" into a USB port of the TV set.
NOTE: Any USB port can be used if the TV has multiple USB ports.
- Press [HOME] on the remote to open the HOME menu.
- Navigate to the [Settings] category and press [Enter] to select it.
- Navigate to and select [Customer Support].
- Navigate to and select [Software Update], then select [USB].
- A series of different messages will appear on the TV screen - follow the on-screen instructions.
- The update will start and an orange Led light will start blinking on the front panel of the TV.
WARNING: During the software installation process, please do not:
- Remove the USB device
- Turn off the TV
- Disconnect the TV from the power supply
- When the "Firmware update complete" message is displayed on the TV set, the TV will turn off and then turn back on to complete the update. - Do not remove the USB device or turn off the TV set.
- After the TV turn back on, remove your USB storage device from the USB port.
Step 2: Check the update was successfulCheck the current software version to confirm that the update has successfully been installed.
- If the version number is "v6.537" or higher, the software update was successful.
- If the version number isn't "v6.537" or higher, download and install the update again.
Questions & Answers
Possible Issue During the Update
Need more information? See our FAQs about updating the software over the Internet:
- Will my personal settings be deleted after the update?
No, all your personal settings will be kept.
- Can I install an older version of the software?
No. To ensure that your TV remains at optimum performance, the installation of an older software version is not possible: the latest software version contains all the benefits and improvements of previous versions.
- Is it normal for the TV to turn off during the update process?
It is normal for the TV to restart during the update process. It will take a longer time for the TV to restart while installing the new software.
What to do if you have problems updating your TV firmware using the Internet
If either message "An error occurred during the software update" or "Software cannot be updated using this USB device" is displayed on the TV screen, please proceed to the following procedures for a possible solution:
- Make sure your USB storage device is in good working order. If it is, try downloading the update file again.
- Turn off the TV by pressing the [POWER] button on the TV set.
- Press the [POWER] button again, and proceed with the installation process again.
If the message "No newer version of the TV software was found" is displayed on the TV front panel display, your TV already has newest software version installed, so you do not need to update it.
For other FAQs about Troubleshooting, please see the "Questions and Answers" section on the Sony Support Site.