How to set up and use the Wi-Fi Direct feature of the 2011 and 2012 TV models
IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.
IMPORTANT:
- Some models require the UWA-BR100 USB Wireless LAN adapter to be connected to the TV to enable this feature. For model-specific information, check the specifications or supplied operations guide.
- Prior to following the steps in this solution, make sure that the latest software update has been installed.
- To automatically download software updates, set the Automatic software download setting to On.
To set up and use the Wi-Fi Direct feature, follow the steps below.
- On the supplied remote control, press the HOME button.
- Select Applications.
- Select Wi-Fi Direct or Wi-Fi Direct Mode.
- Connect the Wi-Fi Direct device to the TV.
For details, refer to the following:
If Wi-Fi Direct connection fails, follow these steps:
-
Press the Options button.
- Select Manual.
- Select either WPS or Other Methods.
- For WPS (Push Button) connection
- On the mobile device or computer, go to the wireless network setting screen, select WPS (if capable, for automatic setup) or perform a scan to connect to the television.
- The WPS setting is not available on all Wi-Fi Direct capable devices. Check the manual supplied with the mobile device or computer for information regarding the WPS setting.
- Other Methods
- The SSID and the WPA Key that appears on the TV will have to be entered on the mobile device or computer.
- For WPS (Push Button) connection
- Connect the mobile device or computer to the TV.
Once the setup is complete, images, videos and songs can be shared between the mobile device or computer and the TV.